T:
0151 336 8328
Pump tests
Pump tests
Flowcheck Engineers arrive on site fully equipped to perform pump tests efficiently, with the minimum disruption to the operation of the plant.
If new tapping points are required to enable pressure measurements, we can install these conventionally or by using under pressure drilling techniques (hot tapping).
By testing the pumps in situ, whilst installed in the pumping station, the pump tests will help reveal any deficiencies in the design of the pumping system.
Pump test surveys are followed with a full report detailing all the measurements obtained and graphical plots of the pump performance and power curves.
Fundamental to the accuracy of a pump test is the ability to take true measurements of pressure and flow, the most difficult of which is flow. Flowcheck is a certified MCERTS inspection company and specialises in flow measurement.
Normally we are commissioned to perform pump tests to confirm their condition prior to replacement or refurbishment. There is however a growing trend amongst our clients to have pumps tested both before and after a refurbishment, to confirm that contractual obligations have been fulfilled.
Whatever the need, Flowcheck works with clients to ensure they get the measurement information they require. For more information contact Flowcheck on 0151 336 8328
Download our Guide to specifying pumps